Slower Transfer Speed to LS-X3.0TL when compared to my older LS-V2.0TL

[bulks]

I have 2 x buffalo NAS units.

 

These 2 are on the Same home network, both are connected through the same 1GB switch, both have the same Ethernet Frame Size set.

 

Transferring from my PC to the LS-V2.0TL i gte a steady 50MB to 55MB speed.

 

Transferring from the same PC through the same swicth to the LS-X3.0TL its starts at about 45MB, but then looks to bottle neck down to a 20-25 MB speeds.

 

I cant see anything different between the two NAS network setups, even if i swap the cables around between the 2 NAS boxes the speeds do not swap with them, so i dont see howit can be a cable between the switch and the NAS.

 

Both are running the most recent firmware 1.56.

 

Any ideas why this is happening?

[Jotin]

The LS-V2.0TL has a much faster processor and will trasnfer files at around 40-60MBps. The LS-X3.0TL will get around 20-30MBPS.

[cma12000]

I have the similiar problem.  My  LS-X3.0TL file transfer speed is only 2Mbps. 

 

I have another LS-CH1.0TL-US on the same gigbyte network which I can get about 15Mbps fiel transfer speed.

 

How do I get my LS-X3.0TL file transfer speed to at least 15Mpbs.  I know some people can get more than 30Mpbs. 

 

Thanks!

Chris

[maxgajo]

<p>I have the similiar problem.  My  LS-X3.0TL file transfer speed is only 2Mbps. </p><p> </p><p>I have another LS-CH1.0TL-US on the same gigbyte network which I can get about 15Mbps fiel transfer speed.</p><p> </p><p>How do I get my LS-X3.0TL file transfer speed to at least 15Mpbs.  I know some people can get more than 30Mpbs. </p><p> </p><p>Thanks!</p><p>Chris</p>

Hi did you fix the speed transfer problem?

Tks.