Terastation III , TeraStation III iSCSI to TFTP boot mode !!!

[bonbonofme2]

   

Anyone can tell me how to turn Terastation III, Terastation III iSCSI to TFTP boot mode ? thanks and regards

[AngelsAbys]

For accessing the TFTP boot mode please follow this link http://forums.buffalotech.com/t5/Storage/FAQ-3-of-3-TFTP-boot-procedure-please-read-this/td-p/11015" target="_blank" rel="nofollow">http://forums.buffalotech.com/t5/Storage/FAQ-3-of-3-TFTP-boot-procedure-please-read-this/td-p/11015   You cannot turn units into other units, i.e. a TS3 into a TS3 ISCSI as seeing this will void any warranty that remains on the unit and proper operation cannot be guaranteed.

[bonbonofme2]

   

Anyone can tell me how to turn TS3 to TFTP boot mode ? tks

[AngelsAbys]

There is no specific mode for TFTP booting on a TS3, you can initiate the comman prompt window with a static IP on your computer of 192.168.11.1 with a direct connection to the TS3 unit.  To further chances you can set unit to EM mode by powering unit off, and holding red button under LCD panel than powering back on.