NAS LS-XL New Network will not connect to NAS

[oldnasowner]

Hello
Need some help if possible
I have moved house and thus new WIFI network.
The NAS will not connect when all plugged in.
Nas Navigator shows the drive when plugged directly via ethernet to my laptop and I can see my old network settings, IP addres, workgroup, subnetmask etc.

I set this up so long ago I cannot remember if I set a static IP or not.
Whats the procedure with changing networks over and getting these connected again.
Many Thanks

[1000001101000]

I believe that if you connect it directly to a PC NasNavigator should be able to detect it and allow you to change the devices network settings.

This can work despite incompatible subnet settings because that communication uses UDP broadcast packets.