have problem with nas

[billy]

hi all could i please ask if someone could please help me, after have a power cut in my house my nas has all gone wrong all i get is Emergency Mode  on my Buffalo NAS Navigator and for the life of me i cant get it to work, my nas is a ls-wxl/r1 thanks for your time
   

[1000001101000]

That indicates your device is booting but there is some sort of problem with the root filesystem. You can try running the the firmware updater to reinstall the firmware to correct this.

If that doesn't work you can use the debug options to do a force-update or if necessary repartition and reformat the device if all else fails. As always, proceed with caution if there is any sata on the device that you care about.

Here are instructions for enabling debug mode on lsupdater:
https://buffalonas.miraheze.org/wiki/Enable_Debug_mode

[billy]

can anyone please tell me what i'm doing wrong ?? https://ibb.co/Zz2NnRJ

[1000001101000]

What have you tried?

[billy]

sorry forgot to add photos https://ibb.co/Zz2NnRJ

[davo]

You have a faulty disk, identify which one and then replace it. Is there a backup? What RAID mode was set?

[billy]

You have a faulty disk, identify which one and then replace it. Is there a backup? What RAID mode was set?

hi davo  i have replaced all drives with new ones the photo above is from the new drives

[billy]

can anyone please tell me if  ls_series-v174 is the right update for the LS-WXL/R1 ? (LSWXL-WM42E) THANKS

[1000001101000]

yes it is.

http://buffalo.jp/support_ap/support/products/ls_wxl.html

[billy]

yes it is.

http://buffalo.jp/support_ap/support/products/ls_wxl.html

Thank you that is the one i was trying , get feed up now spent last 3 days trying to fix this with no joy  >:( >:( :( 

[1000001101000]

what debug options did you enable when trying to format the new drives?

[billy]

what debug options did you enable when trying to format the new drives?

Thank you for your time , in the LSUupdater i edited

[Application]
Title = BUFFALO LinkStation Series Updater Ver.1.74
WaitReboot = 1200
WaitFormat = 600
WaitFileSend = 600
WaitDiscover = 120

[Target]
ProductID = 0x00000011
ProductID2 = 0x00000012
ProductID3 = 0x00000013
ProductID4 = 0x00000014
ProductID5 = 0x00003006
ProductID6 = 0x00003007
ProductID7 = 0x00000015
ProductID8 = 0x00000016
ProductID9 = 0x00003008
ProductID10 = 0x00004001
ProductID11 = 0x00000017
ProductID12 = 0x00000019
ProductID13 = 0x00000020
ProductID14 = 0x00003010
Name = LinkStation

[Flags]
VersionCheck = 0
NoFormatting = 0

[SpecialFlags]
Debug=1

i then restart LSUpdater and get this

partition not detected

The TARGET will be formatted and data will be lost

continue to update

I press yes
_______________________________________
I then get LSUpdater popup
farmat failed
update aborted

[1000001101000]

to get the updater to actually perform the repartition/reformat you need to go into the debug menu (upper-left) enable the relevant options (force format, force partition, force update).

This will wipe out any data on the drives and then do a fresh firmware install.

[billy]

to get the updater to actually perform the repartition/reformat you need to go into the debug menu (upper-left) enable the relevant options (force format, force partition, force update).

This will wipe out any data on the drives and then do a fresh firmware install.

yes sorry done all that and still get

i then restart LSUpdater and get this

partition not detected

The TARGET will be formatted and data will be lost

continue to update

I press yes
_______________________________________
I then get LSUpdater popup
farmat failed
update aborted

[1000001101000]

do you have both drives installed?