News:

Buffalo provides Data Recovery services. Read about it here.

Main Menu

Cannot "Reset" Link Station LS-WVL After HD Failure

Started by tyrone3a, September 01, 2018, 04:04:36 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

tyrone3a

September 01, 2018, 04:04:36 PM
Hi!

Had HD failure. Replaced BOTH drives. Link Station showed red light flashing six (6) times (repeating). Tried to "reset" LinkStation by turning it off, then on while holding function button. Blue light was then flashing rapidly. Then pressed function key again. Blue light still flashing rapidly 30 minutes later. Flashing amber light never seen, so initialization never started. NAS Navigator2 does not find any Link Station on network. Thus cannot perform initialization manually.

Any help getting drives initialized and Link Station back up and running would be appreciated.

tyrone3a

davo

#1
September 01, 2018, 04:13:34 PM
You need the boot image for the unit, the operating system was on the original disks so now it has nothing to boot from.
PM me for TFTP / Boot Images / Recovery files  LSRecovery.exe file.
Having network issues? Drop me an email: info@interwebsireland.com and we will get it fixed!

Have i helped you? Buy me a coffee as a thanks!
https://buymeacoffee.com/buffalodavo
Print
Go Up Pages1
User actions
Browser ID: smf (is_webkit)
Templates: 4: index (default), Display (default), GenericControls (default), GenericControls (default).
Sub templates: 6: init, html_above, body_above, main, body_below, html_below.
Language files: 5: index+Modifications.english (default), Post.english (default), Editor.english (default), Drafts.english (default), StopForumSpam.english (default).
Style sheets: 4: index.css, attachments.css, jquery.sceditor.css, responsive.css.
Hooks called: 139 (show)
Files included: 35 - 1354KB. (show)
Memory used: 945KB.
Tokens: post-login.
Queries used: 15.

[Show Queries]