News:

Buffalo provides Data Recovery services. Read about it here.

Main Menu

Buffalo NAS LS-CH2.0TL Blinking Red Light 6 Times and need help!

Started by TehepicHD, March 09, 2018, 09:40:42 AM

Previous topic - Next topic
Print
Go Down Pages1 2
User actions

TehepicHD

March 09, 2018, 09:40:42 AM
Hello So I have this nas and I Opened TFTP Boot and was able to get it started in EM Mode and I Was able to find in the updater application in Windows 10. But that is as far as I have goten It gives me this message

and the settings in the debug menu

Can anyone help me?

oxygen8

#1
March 09, 2018, 10:24:26 AM
after tftp the nas has missing dhcp

set your pc ip to 169.254.212.6 and start LSUpdater again

a perfect way is described on my german howto
http://forum.nas-hilfe.de/buffalo-technology-nas-anleitungen/anleitung-tftp-und-firmware-flashen-mit-bildern-t903.html

TehepicHD

#2
March 09, 2018, 10:29:44 AM
Quote from: oxygen8 on March 09, 2018, 10:24:26 AM
after tftp the nas has missing dhcp

set your pc ip to 169.254.212.6 and start LSUpdater again

a perfect way is described on my german howto
http://forum.nas-hilfe.de/buffalo-technology-nas-anleitungen/anleitung-tftp-und-firmware-flashen-mit-bildern-t903.html

Ok but now I get this

oxygen8

#5
March 09, 2018, 11:48:09 AM
you try to use a new drive
then you have to read about debug and rebuild partition table
point 9. from my howto

TehepicHD

#6
March 09, 2018, 11:54:50 AM
Quote from: oxygen8 on March 09, 2018, 11:48:09 AM
you try to use a new drive
then you have to read about debug and rebuild partition table
point 9. from my howto

Same Problem with another drive I know works

oxygen8

#7
March 09, 2018, 12:18:22 PM
which debug optons do you use?

TehepicHD

#9
March 09, 2018, 12:58:36 PM
Quote from: TehepicHD on March 09, 2018, 12:39:38 PM
Quote from: oxygen8 on March 09, 2018, 12:18:22 PM
which debug optons do you use?

Just the Rebuild Partition Table

And I also just tried all of them and it didn't work

oxygen8

#10
March 09, 2018, 01:16:07 PM
post your lsupdater.ini

TehepicHD

#11
March 09, 2018, 01:21:20 PM
Quote from: oxygen8 on March 09, 2018, 01:16:07 PM
post your lsupdater.ini

Code Select
[Application]
Title = BUFFALO LinkStation Series Updater Ver.1.74
WaitReboot = 480
WaitFormat = 500
WaitFileSend = 600
WaitDiscover = 120

[Target]
ProductID = 0x00000011
ProductID2 = 0x00000012
ProductID3 = 0x00000013
ProductID4 = 0x00000014
ProductID5 = 0x00003006
ProductID6 = 0x00003007
ProductID7 = 0x00000015
ProductID8 = 0x00000016
ProductID9 = 0x00003008
ProductID10 = 0x00004001
ProductID11 = 0x00000017
ProductID12 = 0x00000019
ProductID13 = 0x00000020
ProductID14 = 0x00003010
Name = LinkStation

[Flags]
VersionCheck = 1
NoFormatting = 1

[SpecialFlags]

Debug = 1

oxygen8

#12
March 09, 2018, 01:46:35 PM
QuoteNoFormatting = 1

must be
NoFormatting = 0

(my howto ...)

TehepicHD

#13
March 09, 2018, 07:16:06 PM
Quote from: oxygen8 on March 09, 2018, 01:46:35 PM
QuoteNoFormatting = 1

must be
NoFormatting = 0

(my howto ...)

That Worked! Thanks for the help!

TehepicHD

#14
March 09, 2018, 09:42:22 PM
Quote from: TehepicHD on March 09, 2018, 07:16:06 PM
Quote from: oxygen8 on March 09, 2018, 01:46:35 PM
QuoteNoFormatting = 1

must be
NoFormatting = 0

(my howto ...)

That Worked! Thanks for the help!

Hey so you know how I said it worked but the button broke while flashing firmware so...
Print
Go Up Pages1 2
User actions
Browser ID: smf (is_webkit)
Templates: 4: index (default), Display (default), GenericControls (default), GenericControls (default).
Sub templates: 6: init, html_above, body_above, main, body_below, html_below.
Language files: 5: index+Modifications.english (default), Post.english (default), Editor.english (default), Drafts.english (default), StopForumSpam.english (default).
Style sheets: 4: index.css, attachments.css, jquery.sceditor.css, responsive.css.
Hooks called: 427 (show)
Files included: 35 - 1354KB. (show)
Memory used: 1102KB.
Tokens: post-login.
Queries used: 16.

[Show Queries]