LS-WXL not detected

[Ripus]

Hello,

I have a problem with my buffalo LS-WXL, after change the disks (all disks), the disk is not detected now.
I have a red light flashing -
7 quick flash red.

Can you help me ?

Thank You

[oxygen8]

start the nas with one old and one new disk
now format the new disk
shut down
replace the last old disk
startup
format the second new disk

[Ripus]

Thk You for your reply,
Ok for my first NAS, it's ok, I need to test that for my second NAS if I find my old disks.

[Ripus]

I have always the same problem, but now with the original disk, the flashing led have changed.

No I have 2 long orange ans 5 short orange,

In the documentation the flash code is :
   Updating the firmware. *Do not turn LinkStation OFF during the update.

But one hour later, it's always the same.

Can you help me ?

Thank You

[oxygen8]

login  and check the status of the new disk
if this disk is formatted, you can shut down and remove the original disk

[Ripus]

I can't loging because the NAS is not find and the flash code is :
2 orange long
5 orange short

[oxygen8]

orange is standing for info
the system is up and running
if you can not find the webinterface use the nasnavigator
try with a other pc, laptop, mobile phone