LS420D - Port Requirement

[tjdavis1111]

I have a LS420D3BB, Win7 and McAfee Host Intrusion Protection.  Because this is a corporate laptop being used in a home-based office, I cannot disable the firewall.  Is it possible to provide me with the protocols and ports required by the device? 

When I try to discover the device with NASNavigator2 , McAfee throws the following messages.


McAfee Host Intrusion Prevention Log
Monday, July 06, 2015 3:11:17 PM

Time:    7/6/2015 3:10:52 PM
Event:    Traffic
IP Address/User:    192.168.11.7
Description:    NASNaviator2 (NasNavi.exe)
Path:    C:\Program Files (x86)\BUFFALO\NASNAVI\NasNavi.exe
Message:    Blocked Incoming UDP -  Source 192.168.11.7 :  (22936)  Destination 255.255.255.255 :  (22936)
Matched Rule:    Block All Traffic

Time:    7/6/2015 3:10:55 PM
Event:    Traffic
IP Address/User:    192.168.11.11
Description:    SYSTEM
Path:    SYSTEM
Message:    Blocked Incoming UDP -  Source 192.168.11.11 :  (51706)  Destination 255.255.255.255 :  (19540)
Matched Rule:    Block All Traffic

Time:    7/6/2015 3:10:57 PM
Event:    Traffic
IP Address/User:    192.168.11.7
Description:    NAS Power Management Service (nassvc.exe)
Path:    C:\Program Files (x86)\BUFFALO\NASNAVI\nassvc.exe
Message:    Blocked Incoming UDP -  Source 192.168.11.7 :  (22936)  Destination 255.255.255.255 :  (51483)
Matched Rule:    Block All Traffic

Time:    7/6/2015 3:10:57 PM
Event:    Traffic
IP Address/User:    192.168.11.7
Description:    NAS Power Management Service (nassvc.exe)
Path:    C:\Program Files (x86)\BUFFALO\NASNAVI\nassvc.exe
Message:    Blocked Incoming UDP -  Source 192.168.11.7 :  (22936)  Destination 255.255.255.255 :  (51483)
Matched Rule:    Block All Traffic