Web Access interface missing settings for buffalonas.com on LS-W2.0TLG-V3?

[Undepelo]

So I have been trying to solve this for years...yes years and I finally am giving up if I cant get help from this community. I have been trying to set up the buffalonas.com access and after failing for a long time, I was told by a friend I would need to set up the NAS with a Windows XP machine. Well I finally found one and it makes no difference. When I access the NAS Web Admin interface running 3.10 FW I get to the Web Access part, where I expect to enable the access and find the options to give the NAS a name and "key" for access to the buffalonas.com site. Problem is in the "Web Access", there is no service setting options. Do I need to re-install the F/W? I disabled the DHCP and all sorts of other combinations of things to see if this service settings is hidden because of a router issue etc. but nothing makes the service settings come up. Any help will be appreciated!

[joma90]

Have you clicked on the service tab when you go in to webaccess? Should look like the picture i posted below.

Here is a guide on how to setup webacess for your type of unit. Option C: http://buffalonas.com/manual/en/webac_nas.html#

If you arent getting this below i would factory reset your unit. This will only delete your settings not your data.

[davo]

Post a screen shot of what options you causally are seeing

[Undepelo]

Thanks for your replies. Here's what I see. Notice that the "Web Access" tab to the left does not expand to show the folder setup tab and the service setup tab. There is a Service Setup tab under Shared Folders but it doesn't relate to web access.


[attachment deleted by admin]

[Undepelo]

Bump, no ideas?  :(

[joma90]

hmm... what happens when you click the "hammer" symbol? its the order part next to array. if it does nothing really but edit the name then i recommend factory restore the unit. This will not erase the data.