HSDH500GL Firmware version 2.10 with Netgear Router wgr614 v6

[PennieD]

   

Hi

 

I have tried unsuccessfully to activate the Web Access through the BuffaloNAS.com website.

 

I've configured the Linkstation and my router per the instructions--but I keep getting errors about the device name and password--"must be 20 characters or less, hypens, dashes...etc".

 

My device name and passwords meet the criteria specified.

 

I have tried both the UPnP and manually port forwarding ( port 9000) on the rounter--each trail produces the same results.

 

Any advice?--Is it really this difficult?

 

Thanks

 

 

 

 

[Dustrega]

PennieD,

 

   Is this in the Web Access setup that you're getting an error from the NAS?  You are picking a unique BuffaloNAS.com name correct?  Post what information is being entered and we'll help you as best we can.

Message Edited by Dustrega on 02-23-2009 05:18 PM

[pagesk]

   

this is the same problem I have.

 

I tried to upgrade the firmware to 2.11 I get "ACP_STATE_FAILURE"  updating is aborted.

[Colin137]

PennieD, i've seen this issue after updating the firmware. Try resetting the device to factory defaults from Maintenance->Initialization, Restore.