I17 - Resync RAID Array1

[reihab]

Dear all, 

 

i had in the last days a power failure (yes I know should buy UPS), now the box LS-QVL3AC is in error mode I17 and is doing a resync of the Array one since more then 24h. The used space is around 830GB (music, pictures ....) out of 2700 GB. Any idea how long this could take ??? What happen if I shut down the box, Manegement interface is still available. 

 

Thanks

 

Reiner

 

[davo]

Just leave it complete, it might take more than 24 hours, if you reboot the unit it will just start the process again from the beginning.

[ckbernie]

I had this experience with my Linkstation Pro Quad too. Have a "?" at the icon of my NAS in Navigator 2.

I have 2x 3T HD and wanted to make them RAID1. The I17 indication shown up. Very fustrated now. Is this really normal? It happen to every NAS system in the Market? Never see this mentioned in most of the review.

Doesn't it is a lot more helpful if NAS Navigator 2 report the status of the "Resyncing" process? I don't know how long do I need to wait now.

I found that my Linkstation Pro Quad even auto shut down sometime after I shut down my router and moderm. I need to restart the "Resyncing" again now. Is this normal?

[davo]

You can check the amount of time left in the System -> Storage section of the GUI, pretty sure it is also mentioned in the manual.

[kkrssll]

I'm having the same thing happening to my LinkStation LS421DE with two 2TB drives (RAID 1).  I check the status and it tells me it began resyncing on March 1st and it is now March 27th!!!  This afternoon the NAS  lost its IP address and so I can't even reach it to do anything with it.  Guess I'm just going to have to just turn the power off and let it "cool down" and then see if it will restart normally and then let it start its resyncing again.  If anyone out there has any thoughts and/or suggestions about what is happening and/or how to fix it, I would be glad to hear from you.

Thanx
Karl

[heli]

You can check the amount of time left in the System -> Storage section of the GUI, pretty sure it is also mentioned in the manual.

mind LS-QVL is "I14: Resyncing RAID array 1"

and in the GUI web it stuck at

"Checking drive...
No features can be changed until the drive has been completely checked. Also, file sharing is not available.
Progress: Progress"

I can't click any menu at the top, please advise :'(