TFTP Boot Recovery Working for LS-VL NAS Models

[SnowBrdPaint]

All, 

 

Today my LS-V3.0TL was bricked with the E6 (6 red blinking lights) error. Buffalo Tech Support told me a TFTP package to restore my LS-VL series NAS was not created yet, but there was a work around using "TFTP Boot Recovery LS-XL 1.00.exe" file. Unfortunately, the workaround instructions did not work.

 

Luckily I was able to create a working TFTP package. Hopefully this will help any other users that experience this error with these models. 

 

USE AT YOUR OWN RISK

 

Please follow all instructions on the storage sub-forum stickes for instructions on how to use this tool. The TFTP tool below should work with any LS-VL (LS-V1.0TL, LS-V3.0TL, LS-V3.0TL, LS-V4.0TL) model.

 

https://dl.dropbox.com/u/2020630/TFTP%20Boot%20Recovery%20LS-VL%201.53.zip" target="_blank">TFTP Boot Recovery LS-VL 1.53.zip

 

Good Luck!

[ncmorgan]

hi can you tell  me all  the settings you put in ip address there is a few in that page and it only says to change ip address

thanks

[davo]

ncmorgan wrote:

hi can you tell  me all  the settings you put in ip address there is a few in that page and it only says to change ip address

thanks

Follow FAQ 3 of 5 in the sotrage section for full instructions.

 

[bonehead]

Hi, could you upload the file again the link is already broken, thank you for your help !

[Shonk]

http://www.mediafire.com/?5ctwl6g8sc1ckt8">http://www.mediafire.com/?5ctwl6g8sc1ckt8