LS-WXL4A6 HDD error after Changing from Raid 0 to Raid 1

[gcahal]

I had to send this unit back in because I had problems with the units HDDs. Well I received my unit.today....decided I didn't want to lose data again so I decided to change the unit from a Raid 0 to a Raid 1. luckly I did set up the E-Mail notification for the drive. I logged into the wed access and found where to change it from a Raid 0 to a Raid 1. 

Here are the emails I received from the unit

 

1st one

Test Mail Message

This e-mail notice is to confirm LinkStation functionality.


The LinkStation can be configured using the following URL:

[LinkStationInformation]
LinkStationName: LS-WXL4A6 (LS-WXL)
Time: 2012/10/20 19:17:04
Setting Screen: http://10.0.1.13/" target="_blank">http://10.0.1.13/

2nd one

RAID rebuild notice

RAID mode is changing.

RAID Mode: RAID-Delete
Changed Disk: RAID Array 1(Disk 1 Disk 2)

[LinkStationInformation]
LinkStationName: LS-WXL4A6 (LS-WXL)
Time: 2012/10/20 20:01:37
Setting Screen: http://10.0.1.13/" target="_blank">http://10.0.1.13/

 

3rd one

RAID rebuild notice

RAID mode change complete.

RAID Mode: RAID-Delete
Changed Disk: RAID Array 1(Disk 1 Disk 2)

[LinkStationInformation]
LinkStationName: LS-WXL4A6 (LS-WXL)
Time: 2012/10/20 20:03:21
Setting Screen: http://10.0.1.13/" target="_blank">http://10.0.1.13/

 

4th one

DISK Error Notification

HDD error occurred
Disk(s) the error occurred:"Disk 1"


Disk cannot be mounted.

[LinkStationInformation]
LinkStationName: LS-WXL4A6 (LS-WXL)
Time: 2012/10/20 20:03:33
Setting Screen: http://10.0.1.13/" target="_blank">http://10.0.1.13/

 

5th one

DISK Error Notification

HDD error occurred
Disk(s) the error occurred:"Disk 2"


Disk cannot be mounted.

[LinkStationInformation]
LinkStationName: LS-WXL4A6 (LS-WXL)
Time: 2012/10/20 20:03:52
Setting Screen: http://10.0.1.13/" target="_blank">http://10.0.1.13/

 

6th one

RAID rebuild notice

RAID mode is changing.

RAID Mode: RAID1
Changed Disk: RAID Array 1(Disk 1 Disk 2)

[LinkStationInformation]
LinkStationName: LS-WXL4A6 (LS-WXL)
Time: 2012/10/20 20:05:39
Setting Screen: http://10.0.1.13/" target="_blank">http://10.0.1.13/

 

7th one

RAID rebuild notice

Error occurred

RAID Mode: RAID1
Changed Disk: RAID Array 1(Disk 1 Disk 2)

[LinkStationInformation]
LinkStationName: LS-WXL4A6 (LS-WXL)
Time: 2012/10/20 20:06:11
Setting Screen: http://10.0.1.13/" target="_blank">http://10.0.1.13/

 

8th one

DISK Error Notification

HDD error occurred
Disk(s) the error occurred:"Disk 1"


Disk cannot be mounted.

[LinkStationInformation]
LinkStationName: LS-WXL4A6 (LS-WXL)
Time: 2012/10/20 20:06:31
Setting Screen: http://10.0.1.13/" target="_blank">http://10.0.1.13/

 

9th one

DISK Error Notification

HDD error occurred
Disk(s) the error occurred:"Disk 2"


Disk cannot be mounted.

[LinkStationInformation]
LinkStationName: LS-WXL4A6 (LS-WXL)
Time: 2012/10/20 20:06:40
Setting Screen: http://10.0.1.13/" target="_blank">http://10.0.1.13/

10th one

RAID rebuild notice

RAID mode is changing.

RAID Mode: RAID1
Changed Disk: RAID Array 1(Disk 1 Disk 2)

[LinkStationInformation]
LinkStationName: LS-WXL4A6 (LS-WXL)
Time: 2012/10/20 20:08:11
Setting Screen: http://10.0.1.13/" target="_blank">http://10.0.1.13/

12th one

RAID rebuild notice

Error occurred

RAID Mode: RAID1
Changed Disk: RAID Array 1(Disk 1 Disk 2)

[LinkStationInformation]
LinkStationName: LS-WXL4A6 (LS-WXL)
Time: 2012/10/20 20:08:44
Setting Screen: http://10.0.1.13/" target="_blank">http://10.0.1.13/

13th one

DISK Error Notification

HDD error occurred
Disk(s) the error occurred:"Disk 1"


Disk cannot be mounted.

[LinkStationInformation]
LinkStationName: LS-WXL4A6 (LS-WXL)
Time: 2012/10/20 20:09:00
Setting Screen: http://10.0.1.13/" target="_blank">http://10.0.1.13/

And finally the 14th one

DISK Error Notification

HDD error occurred
Disk(s) the error occurred:"Disk 2"


Disk cannot be mounted.

[LinkStationInformation]
LinkStationName: LS-WXL4A6 (LS-WXL)
Time: 2012/10/20 20:09:09
Setting Screen: http://10.0.1.13/" target="_blank">http://10.0.1.13/

 

I have not received any more notifications since.......have restarted computer and link station numerous times to no avail............

I have the red light flashing 6 times. This is the same thing it did before.

 

HELP