LS210D dead hard drive/new hard drive install

[nolan]

So I have a LS210d, the 2tb HD in it died and I replaced it with a smaller HD I had. The problem I have is the LED is blinking white, the LSupdater cant find any linkstations. I have tried to research it all on my own but I cant find much in the way of reviving my device.

When first plugging in the NAS, it blinks out the error E07 "Firmware corrupted: Contact Buffalo Support"

I found one tutorial that said to create a ext3 1gb partition and to add the files initrd.buffalo uImage.buffalo on it, but that does not work for me. Also another one that said that when you install a new HD, to copy the sda/1 on the old hard drive and move it to the new hard drive, but that isnt an option since the hard drive is dead.

So what do I do to make it live again so the LSupdater can find it and rebuild the drive/partitions/firmware the way it should be?

[bally]

you need to run tftp check this http://forums.buffalotech.com/index.php?topic=10185.0