Author Topic: have problem with nas  (Read 1602 times)

billy

  • Calf
  • *
  • Posts: 44
have problem with nas
« on: June 07, 2019, 08:47:44 pm »
hi all could i please ask if someone could please help me, after have a power cut in my house my nas has all gone wrong all i get is Emergency Mode  on my Buffalo NAS Navigator and for the life of me i cant get it to work, my nas is a ls-wxl/r1 thanks for your time
   

1000001101000

  • Debian Wizard
  • El Toro
  • ****
  • Posts: 379
  • There's no problem so bad you cannot make it worse
Re: have problem with nas
« Reply #1 on: June 08, 2019, 12:27:31 am »
That indicates your device is booting but there is some sort of problem with the root filesystem. You can try running the the firmware updater to reinstall the firmware to correct this.

If that doesn’t work you can use the debug options to do a force-update or if necessary repartition and reformat the device if all else fails. As always, proceed with caution if there is any sata on the device that you care about.

Here are instructions for enabling debug mode on lsupdater:
https://buffalonas.miraheze.org/wiki/Enable_Debug_mode

billy

  • Calf
  • *
  • Posts: 44
Re: have problem with nas
« Reply #2 on: June 18, 2019, 06:10:43 am »
can anyone please tell me what i'm doing wrong ?? https://ibb.co/Zz2NnRJ
« Last Edit: June 18, 2019, 09:11:35 am by billy »

1000001101000

  • Debian Wizard
  • El Toro
  • ****
  • Posts: 379
  • There's no problem so bad you cannot make it worse
Re: have problem with nas
« Reply #3 on: June 18, 2019, 06:31:55 am »
What have you tried?

billy

  • Calf
  • *
  • Posts: 44
Re: have problem with nas
« Reply #4 on: June 18, 2019, 09:12:42 am »
sorry forgot to add photos https://ibb.co/Zz2NnRJ

davo

  • Really Big Bull
  • VIP
  • *
  • Posts: 5926
Re: have problem with nas
« Reply #5 on: June 18, 2019, 10:23:28 am »
You have a faulty disk, identify which one and then replace it. Is there a backup? What RAID mode was set?
PM me for TFTP / Boot Images / Recovery files  LSRecovery.exe file.

billy

  • Calf
  • *
  • Posts: 44
Re: have problem with nas
« Reply #6 on: June 19, 2019, 03:20:45 pm »
You have a faulty disk, identify which one and then replace it. Is there a backup? What RAID mode was set?

hi davo  i have replaced all drives with new ones the photo above is from the new drives

billy

  • Calf
  • *
  • Posts: 44
Re: have problem with nas
« Reply #7 on: June 20, 2019, 09:47:18 am »
can anyone please tell me if  ls_series-v174 is the right update for the LS-WXL/R1 ? (LSWXL-WM42E) THANKS

1000001101000

  • Debian Wizard
  • El Toro
  • ****
  • Posts: 379
  • There's no problem so bad you cannot make it worse
Re: have problem with nas
« Reply #8 on: June 20, 2019, 10:07:47 am »

billy

  • Calf
  • *
  • Posts: 44
Re: have problem with nas
« Reply #9 on: June 20, 2019, 09:08:41 pm »
yes it is.

http://buffalo.jp/support_ap/support/products/ls_wxl.html

Thank you that is the one i was trying , get feed up now spent last 3 days trying to fix this with no joy  >:( >:( :( 

1000001101000

  • Debian Wizard
  • El Toro
  • ****
  • Posts: 379
  • There's no problem so bad you cannot make it worse
Re: have problem with nas
« Reply #10 on: June 21, 2019, 08:47:05 am »
what debug options did you enable when trying to format the new drives?

billy

  • Calf
  • *
  • Posts: 44
Re: have problem with nas
« Reply #11 on: June 21, 2019, 10:32:34 am »
what debug options did you enable when trying to format the new drives?

Thank you for your time , in the LSUupdater i edited

[Application]
Title = BUFFALO LinkStation Series Updater Ver.1.74
WaitReboot = 1200
WaitFormat = 600
WaitFileSend = 600
WaitDiscover = 120

[Target]
ProductID = 0x00000011
ProductID2 = 0x00000012
ProductID3 = 0x00000013
ProductID4 = 0x00000014
ProductID5 = 0x00003006
ProductID6 = 0x00003007
ProductID7 = 0x00000015
ProductID8 = 0x00000016
ProductID9 = 0x00003008
ProductID10 = 0x00004001
ProductID11 = 0x00000017
ProductID12 = 0x00000019
ProductID13 = 0x00000020
ProductID14 = 0x00003010
Name = LinkStation

[Flags]
VersionCheck = 0
NoFormatting = 0

[SpecialFlags]
Debug=1

i then restart LSUpdater and get this

partition not detected

The TARGET will be formatted and data will be lost

continue to update

I press yes
_______________________________________
I then get LSUpdater popup
farmat failed
update aborted

1000001101000

  • Debian Wizard
  • El Toro
  • ****
  • Posts: 379
  • There's no problem so bad you cannot make it worse
Re: have problem with nas
« Reply #12 on: June 21, 2019, 10:35:52 am »
to get the updater to actually perform the repartition/reformat you need to go into the debug menu (upper-left) enable the relevant options (force format, force partition, force update).

This will wipe out any data on the drives and then do a fresh firmware install.

billy

  • Calf
  • *
  • Posts: 44
Re: have problem with nas
« Reply #13 on: June 21, 2019, 10:45:35 am »
to get the updater to actually perform the repartition/reformat you need to go into the debug menu (upper-left) enable the relevant options (force format, force partition, force update).

This will wipe out any data on the drives and then do a fresh firmware install.

yes sorry done all that and still get

i then restart LSUpdater and get this

partition not detected

The TARGET will be formatted and data will be lost

continue to update

I press yes
_______________________________________
I then get LSUpdater popup
farmat failed
update aborted

1000001101000

  • Debian Wizard
  • El Toro
  • ****
  • Posts: 379
  • There's no problem so bad you cannot make it worse
Re: have problem with nas
« Reply #14 on: June 21, 2019, 11:00:35 am »
do you have both drives installed?