Buffalo Terastation 1200 Bittorrent Client Download Problem

[oxygen8]

you have to open telnet
i am not able to open ssh on the TS1200D

you have to use only one command after setting up a password

Code Select Expand

/usr/sbin/telnetd

[Tommi61]

I managed to set the root password, the command you gaved to me, will work. But putty gives every time to me when i try to connect, Network error: Connection refused error message.

This is Acp Commander picture.

http://oi68.tinypic.com/1rzrt0.jpg

[oxygen8]

use port 23 telnet
do not use port 22 ssh

[Tommi61]

The port number you gaved works in putty, but now i have next problem. Where and how, i can download this transmission torrent client for my terastation ?.

[oxygen8]

array1 or disk1

you need the factory default folder share !

Code Select Expand

find / -name share
is there array1 in the result?







with array1 use

Code Select Expand

cd /tmp ; wget download.nas-hilfe.de/oxygenacht/transmission2.84_array1.tar.gz

with disk1 use

Code Select Expand

cd /tmp ; wget download.nas-hilfe.de/oxygenacht/transmission2.92_disk1.tar.gz


install

Code Select Expand

tar xvfz transmission* -C /


start

Code Select Expand

/etc/rc.d/extensions.d/S95_transmission.sh

[Tommi61]

should I put those commands what are above, into the putty, or acp commander ?

[oxygen8]

putty

[Tommi61]

When is enter this command to the putty find / -name share, putty gives always to me this result, permission denied.
So what am I still doing wrong?

Putty picture 1
http://oi64.tinypic.com/24mdsat.jpg

Putty picture 2 part 1, i splitted this picture is in half, because picture would have been, otherwise too fuzzy.
http://oi64.tinypic.com/xldxmc.jpg

Putty picture 2 part 2
http://oi68.tinypic.com/qsl54j.jpg

Putty picture 3
http://oi66.tinypic.com/33k544m.jpg

Putty picture 4
http://oi64.tinypic.com/2q248zb.jpg

[oxygen8]

you should do

Code Select Expand

9. verbinden mit Putty und telnet als root mit dem Kennwort newrootpass

from google translator:

9. connect with putty and telnet as root with the password newrootpass

why you are logged in as admin



from your result
/mnt/array1/share

You are using array1

[Tommi61]

The reason is this, why i tried to log in using, with admin username.

Error during editing the admin account.
http://oi64.tinypic.com/20ap92q.jpg

Error during try to create new user, under admin group.
http://oi67.tinypic.com/2duzds4.jpg

[oxygen8]

root is the real admin on linux
you can not create them, he exists

[Tommi61]

Thank you very much oxygen8, i managed to install this transmission client to my terastation. Even though i did some things, maybe a little tricky to understand. Can I change the name, of the download folder, afterwards as I want ?.


Edit. This transmission client, and tracker connection shows connectable no status, when it should be yes. So is one of my settings wrong ?.

[oxygen8]

changing the folders
picture 11.3 from
http://forum.nas-hilfe.de/buffalo-technology-nas-anleitungen/transmission-auf-der-linkstation-live-und-pro-ls-chlv2-ls-xhl-ls-vl-mit-rotem-webinterface-t749.html

to test the portforwarding you have a button
picture 7.2

[Tommi61]

What im doing wrong, when i tried the ports what was in the guide, to get my connectable status from No status, to Yes status in the tracker,
but the result was always a message in the image in the link ?.

http://oi65.tinypic.com/30ms9jo.jpg

[oxygen8]

read about

portforwarding router IPV6 DS-Lite