LinkStation Pro LS-500GL Just Beeps At Me

[bakter]

   

Yes I changed my IP to 192.168.11.1 and all the firewalls and internet protection services are off and I followed all the instructions what you written.

The thing is when I plug lan cable then PC recognize something but the LS won't to a thing. I have seen that in the YouTube LS link/act led must be starting blinking but mine it not. Is there some bigger problem and the LS is totally broken? All the melodies work great just like shows in YouTube (EM and Power ON). One strange thing is when I put on the EM mode Power LED stays green not blinking and just pressing power button not EM then Power LED is blinking. Must be opposite?

 

 

 

[winlinux]

I am also having the same problem......

 

When I connect my LS to the PC , PC does not recognise the active signal coming from the

LS s RJ45 socket.

 

Which means, NO Local area network

 

Can someone help me... I am having so much trouble with this.

 

[tanjl]

200gb to 1tb shouldn't be a problem.

Mine was a 250gb then drive was faulty. Used an old 200gb and it worked for sometime.

Once 1tb came out, I bought it and installed it, using tftp to setup & update the firmware.