Author Topic: How to use Samba on WZR-HP-AG300H  (Read 2305 times)

maxx1337

  • Calf
  • *
  • Posts: 3
How to use Samba on WZR-HP-AG300H
« on: July 29, 2011, 02:37:42 PM »

How to use Samba on WZR-HP-AG300H? with the DD-Wrt firmeware? My USB Drive is mount. But the CIFS? isn t mount. Can someone Help me?


maxx1337

  • Calf
  • *
  • Posts: 3
Re: How to use Samba on WZR-HP-AG300H
« Reply #1 on: July 29, 2011, 03:31:07 PM »

Disk Info --- /dev/sda Block device, size 465.8 GiB (500105740288 bytes) DOS/MBR partition map Partition 1: 465.8 GiB (500104691712 bytes, 976766976 sectors from 2048) Type 0x83 (Linux) Ext3 file system Volume name "Elements" UUID 6CDE58A2-1027-0000-218D-806E6F6E6963 (NCS) Volume size 465.8 GiB (500103644160 bytes, 488382465 blocks of 1 KiB) Status: Mounted on /jffs


maxx1337

  • Calf
  • *
  • Posts: 3
Re: How to use Samba on WZR-HP-AG300H
« Reply #2 on: August 04, 2011, 08:09:23 AM »

no help??? i will return it...


rjt

  • Calf
  • *
  • Posts: 13
Re: How to use Samba on WZR-HP-AG300H
« Reply #3 on: August 04, 2011, 10:39:46 PM »

i believe you have to install the samba package using something like ipkg or opkg package managment software.  ipkg / opkg will retrieve software from a repository, so it may be as simple as "ipkg install samba" since it appears you already have a jffs mount.


eaonflux

  • Calf
  • *
  • Posts: 2
Re: How to use Samba on
« Reply #4 on: August 08, 2011, 12:59:24 PM »

Gonna bump this topic.

 

Model WZR-HP-AG300H

Firmware Versie
DD-WRT v24SP2-MULTI (03/21/11) std - build 16519

?

I bought a WZR-HP-AG300H? to, the specs where awesome.

But after configuring it it became a total waste of mine time.

 

Where is that freaking samba3 (or 2)?

I know it isnt installed in there firmware i checked the console.

the dd-wrt community firmware breaks the warranty and its gonna faile while flashing (i had it 2times now, no worries the router still works)

 

i enabled jffs2 for using ipkg, but that doesnt work either, i am getting the message that the //usr/local/lib isnt't writable, tried many solutions for to get it writeable but it simply doesnt work.

and i am really sick and tired to debug it further, buffalo has to come up with a proper solutions instead of refering to dd-wrt wiki's

why do you support usb storage if there isnt a option to share it???? and why dont you put it in your spec description that sharing usb storage over samba isnt supported?????, if a new i would not buy this router, i feel really scammed.

Now i am stuck with a router i dont use

 

i yes i worked numerous times with dd-wrt with wrt54g,wrt-54gs and wrt-160