News:

Buffalo provides Data Recovery services. Read about it here.

Main Menu

LS-WX2.0TL/R1 flashing red light, one long three short after HDD failure

Started by dw61204, January 18, 2013, 09:52:44 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

dw61204

January 18, 2013, 09:52:44 PM

Hello,

 

I'm using a LS-WX2.0TL/R1 set to RAID 1.

 

I recently noticed the red Info/Error light flashing red....one long flash, then three quick flashes.  I logged into the interface and noticed an error on drive 2.  I had a blank spare drive with the same specs, so I removed the failing drive and put in the fresh drive. 

 

After a reboot, the Info/Error lights still blink in the same pattern.  Now after a few minutes the unit reboots itself.  Eventually, after a few reboots, the unit completely shuts down and I have to pull the power cord to get it to start up again.  Then the cycle repeats itself. 

 

I can no longer log into the interface.  I can still ping the unit without a problem.

 

Any help anyone can provide would be appreciated.

Print
Go Up Pages1
User actions
Browser ID: smf (is_webkit)
Templates: 4: index (default), Display (default), GenericControls (default), GenericControls (default).
Sub templates: 6: init, html_above, body_above, main, body_below, html_below.
Language files: 5: index+Modifications.english (default), Post.english (default), Editor.english (default), Drafts.english (default), StopForumSpam.english (default).
Style sheets: 4: index.css, attachments.css, jquery.sceditor.css, responsive.css.
Hooks called: 113 (show)
Files included: 35 - 1354KB. (show)
Memory used: 919KB.
Tokens: post-login.
Queries used: 19.

[Show Queries]