linkstation won't shutdown using sleep timer

[philayre]

Hi all, I have searched for an answer to my problem but not found an answer...  I have:

 

LS-CH2.0TL-V2

firmware V1.57

 

I had my linkstation set up to auto power on/off during the week and at weekends which it did without issue, however recently I changed the timer settings to:

 

timer one

week days

wake up 17:30

sleep 23:45

 

timer two

saturday and sunday

wake up 00:15

sleep 23:45

 

however the linkstation will no longer turn itself off.  when I check in the morning the power is still on and the blue light is flashing.  the unit will not power off even if i slide the power switch to the off position, I have to remove the power to turn it off.

 

I have restored factory defaults and reprogrammed the timer but this has not resolved my problem.

 

Any ideas?

 

Thanks!

[Jotin]

I would try following this FAQ to reinstall the firmware.

 

http://forums.buffalotech.com/t5/Storage/FAQ-2-of-5-Force-Firmware-update-procedure-please-read-this/td-p/96738" target=_blank>http://forums.buffalotech.com/t5/Storage/FAQ-2-of-5-Force-Firmware-update-procedure-please-read-this/td-p/96738

[philayre]

Thank you, I'll give that a go

 

Phil

[philayre]

That fixed my problem.

 

Cheers!

[Florian71]

<p>I would try following this FAQ to reinstall the firmware.</p><p> </p><p><a href="http://forums.buffalotech.com/t5/Storage/FAQ-2-of-5-Force-Firmware-update-procedure-please-read-this/td-p/96738" target=_blank>http://forums.buffalotech.com/t5/Storage/FAQ-2-of-5-Force-Firmware-update-procedure-please-read-this/td-p/96738</a></p>

I have a smiliar problem. The link is not valid any more.

[davo]

<p>I would try following this FAQ to reinstall the firmware.</p><p> </p><p><a href="http://forums.buffalotech.com/t5/Storage/FAQ-2-of-5-Force-Firmware-update-procedure-please-read-this/td-p/96738" target=_blank>http://forums.buffalotech.com/t5/Storage/FAQ-2-of-5-Force-Firmware-update-procedure-please-read-this/td-p/96738</a></p>

I have a smiliar problem. The link is not valid any more.

http://forums.buffalotech.com/index.php?topic=10184.0