News:

Buffalo provides Data Recovery services. Read about it here.

Main Menu

Terastation and AFP

Started by dmeyers, August 13, 2010, 12:55:24 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

dmeyers

August 13, 2010, 12:55:24 PM

I have a Terastation (TS-1.0TGL/R5) that we use both SMB and AFP shares on a Windows network. It has been working fine for years until yesterday when there was a power failure in which the battery backup failed. When the Terasttaion was powered back up SMB worked fine. However, with afp, we can connect and see the folders but cannot see any files. The unit's settings appear unchanged. What could cause this and can anybody offer any suggestions to fix this?

Dustrega

#1
August 13, 2010, 06:48:08 PM

What's the firmware version of the NAS as shown in NAS Navigator?

dmeyers

#2
August 16, 2010, 02:17:15 PM

It's firmware version 1.03

Dustrega

#3
August 16, 2010, 03:35:42 PM

I would check to make sure Apple support is enabled for the share folders and AFP is running as a service for the device.  If that doesn't work I would recommend re-initializing the unit, http://forums.buffalotech.com/t5/Storage/FAQ-2-of-5-Force-Firmware-update-procedure-please-read-this/td-p/11011" target="_self" rel="nofollow">force updating the firmware and re-initialize again right after.

Print
Go Up Pages1
User actions
Browser ID: smf (is_webkit)
Templates: 4: index (default), Display (default), GenericControls (default), GenericControls (default).
Sub templates: 6: init, html_above, body_above, main, body_below, html_below.
Language files: 5: index+Modifications.english (default), Post.english (default), Editor.english (default), Drafts.english (default), StopForumSpam.english (default).
Style sheets: 4: index.css, attachments.css, jquery.sceditor.css, responsive.css.
Hooks called: 170 (show)
Files included: 35 - 1354KB. (show)
Memory used: 972KB.
Tokens: post-login.
Queries used: 20.

[Show Queries]