Linkstation Pro Duo 1TB won't stay network connected

[britmaveric]

   

LS-WTGL/R1-V3 won't stay connected. I have it set-up on my linksys wireless router on one of the spare ethernet ports. I end up having to unplug it and then plug it in after a minute or so then it comes back up and shows in my network.

 

Any ideas on what I need to look at?

[tanjl]

   

Is your LS Pro Duo using a dynamic or static IP?

 

If dynamic IP, try using a static IP and see if same probelm arise.

[britmaveric]

Static IP, basically stays connected for 3/4 days then drops off. I need to do a hard reset in order to reconnect to the NAS.  It's almost like it goes to sleep.

 

I definitely love some suggestions....

[AngelsAbys]

Some suggestions to offer would be make sure the switch is in the ON position and not the AUTO, another is try changing the IP address at least 10 numbers difference, try to force the firmware onto the u nit incase there is minor corruption http://forums.buffalotech.com/t5/Storage/FAQ-2-of-5-Force-Firmware-update-procedure-please-read-this/td-p/11011" rel="nofollow" target=_blank>http://forums.buffalotech.com/t5/Storage/FAQ-2-of-5-Force-Firmware-update-procedure-please-read-this/td-p/11011