LS-WXL not responding after forced firmware update

[Yop]

Hello,

 

I've upgraded the firmware of my LS-WXL to 1.33. But after doing this, the media server didn't work anymore. I read on this forum, there is a bug with this firmware, so I tried to downgrade to 1.24.

 

But my problem is now, my LS didn't boot anymore. The power led is always blinking and I'm not able to join the LS. When I shutdown the LS and restart it, i can hear the fan and the hard drive working during about 10 seconds but nothing happens after that.

 

I tried to use the TFTP method but the LS doesn't ask anything.

 

What can I do ?

 

Thanks.

[AngelsAbys]

Sounds like what going to a lower version of the FW may have confused the unit, please try an http://forums.buffalotech.com/t5/Storage/FAQ-3-of-5-TFTP-boot-procedure-please-read-this/td-p/11015" target="_self" rel="nofollow">TFTP Boot to see if the unit can be set to a normal mode