News:

RAID is not a replacement for a backup! Here's why.

Main Menu

Disks never stop

Started by ltodd2, August 07, 2010, 10:48:28 AM

Previous topic - Next topic

ltodd2

I've got a HS-DHTGL-R5 and its been working well for a long time.  I have just noticed in the last few days that the disk activity lights for all 4 drives are flasshing constantly.  They never use to do this.  just flashed now and then when not being accessed.  Anyone any ideas as none stop searching by the disks is going to reduce the life of them

 

Thanks

 

 

Lee


Dustrega

Sounds like the NAS is performing a disk or RAID check.  Any message on the front panel at all?


ltodd2

Dustrega

 

No message or anything on the web interface.  I have even restarted it and as soon as its finished booting it starts again.


Dustrega

Sounds like you might need to do the http://forums.buffalotech.com/t5/Storage/FAQ-3-of-4-TFTP-boot-procedure-please-read-this/td-p/11015" target="_self" rel="nofollow">TFTP boot option and immediately after ahttp://forums.buffalotech.com/t5/Storage/FAQ-2-of-4-Force-Firmware-update-procedure-please-read-this/td-p/11011" target="_self" rel="nofollow"> force firmware update with "Rebuild Partition Table" enabled.  Please note this will delete ALL data on the drive.  Post back and let me know what happens.


ltodd2

I've not got a reliable backup at the moment so cant do this yet.  So what it wrong or it doing?

 

 

Lee


Dustrega

It could be a few things at this point and your problem is very generalized in my opinion.  To make an exact deduction of what the problem is or what the unit is doing is very difficult.  The problem could lie with the system board, HDD or even the firmware.  The error codes that blink out via the device access light give us a generalized idea (when they happen) much in the same function a Check Engine light on your car would tell you what is wrong with your vehicle.  The fact that no diagnostic code is given at all doesn't really give me much to go on.  As far as we have documented, the 4 flashing HDD lights mean that the disks are most likely being checked.  That's all I've got, we've not really had scenarios where it has meant otherwise.


Browser ID: smf (is_webkit)
Templates: 4: index (default), Display (default), GenericControls (default), GenericControls (default).
Sub templates: 6: init, html_above, body_above, main, body_below, html_below.
Language files: 5: index+Modifications.english (default), Post.english (default), Editor.english (default), Drafts.english (default), StopForumSpam.english (default).
Style sheets: 4: index.css, attachments.css, jquery.sceditor.css, responsive.css.
Hooks called: 202 (show)
Files included: 35 - 1354KB. (show)
Memory used: 966KB.
Tokens: post-login.
Queries used: 16.

[Show Queries]