News:

RAID is not a replacement for a backup! Here's why.

Main Menu

Instructions needed to install new drive

Started by macoman4u, February 10, 2010, 10:36:55 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

macoman4u

February 10, 2010, 10:36:55 AM
   

I have a #3 drive failure on a 1 terabyte HS-DHTGL ((4 hard drives of 250 gb ea.), and have purchased a new but larger drive with the identical RPM of 7200. The new drive is mounted and installed in the TeraStation, but I have not turned on the system as yet. I now need some instructions for how to boot the system with the new drive. I am not very computer savvy, so something simple and straightforward would be to my liking. Can anyone point me to the pdf file (or other file) about how to change out/install a new hard drive? Thanks.

PCPiranha

#1
February 12, 2010, 03:51:27 AM

1.  Once you have replaced the drive turn on the unit.

 

2.  Log into the web interface (IP of the Terastation in a web browser)

 

3.  Go to disk management > RAID setup

 

4.  Click on the orange tab next to RAID array 1

 

5.  Put a check next to the disk that you have replaced and click "restructure RAID array"

Print
Go Up Pages1
User actions
Browser ID: smf (is_webkit)
Templates: 4: index (default), Display (default), GenericControls (default), GenericControls (default).
Sub templates: 6: init, html_above, body_above, main, body_below, html_below.
Language files: 5: index+Modifications.english (default), Post.english (default), Editor.english (default), Drafts.english (default), StopForumSpam.english (default).
Style sheets: 4: index.css, attachments.css, jquery.sceditor.css, responsive.css.
Hooks called: 128 (show)
Files included: 35 - 1354KB. (show)
Memory used: 998KB.
Tokens: post-login.
Queries used: 16.

[Show Queries]