News:

RAID is not a replacement for a backup! Here's why.

Main Menu

Trouble with failed HDD during raid 5 rebuild LS-QVL

Started by kartoon, November 24, 2014, 09:45:39 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

kartoon

November 24, 2014, 09:45:39 PM
Hey Guys
Hoping you can help out. I have a buffalo LS-QVL. It was running 4 x 2tb WD greens in RAID 5 configuration. One of the drives failed (HDD 2) so i had removed it and replaced it with a 2tb WD red. I went through the RAID rebuild and received the email notification that the rebuild was successful. Then yesterday morning i received HDD failure email from HDD 3 and when i rebooted the NAS it was reporting that both HDD 2 and 3 had errors. I shut down the unit and re sat all the drives and still both showing error. HDD 3 had not reported any errors before dropping out. Because of both drives being in error state the Share is not accessible. Im hoping you guys could provide some assistance as this was an archive drive and there is a whole lot of data on there that i would hate to lose. Thanks in advance.
Cheers
Print
Go Up Pages1
User actions
Browser ID: smf (is_webkit)
Templates: 4: index (default), Display (default), GenericControls (default), GenericControls (default).
Sub templates: 6: init, html_above, body_above, main, body_below, html_below.
Language files: 5: index+Modifications.english (default), Post.english (default), Editor.english (default), Drafts.english (default), StopForumSpam.english (default).
Style sheets: 4: index.css, attachments.css, jquery.sceditor.css, responsive.css.
Hooks called: 109 (show)
Files included: 35 - 1354KB. (show)
Memory used: 933KB.
Tokens: post-login.
Queries used: 16.

[Show Queries]