News:

RAID is not a replacement for a backup! Here's why.

Main Menu

Power Management > UPS Setting

Started by pointon555, June 01, 2014, 02:56:39 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

pointon555

June 01, 2014, 02:56:39 PM
Terastation: TS-XEL86E
Firmware: 1.59
Power: set to manual

I was having issues with my AC power going out this past week. Today, during down time on the weekend, I came in and connected a USB cable to a UPS unit the Buffalo drive was plugged into. I changed the settings of the Buffalo the local web interface of the unit to bring the unit back online if there is a power failure. After changing the settings and testing the unit by killing the power to the UPS, and restoring the power, the Buffalo drive does not turn back on. I have noticed today the batteries of the UPS are dead and hold no charge but the UPS still distributes power. I have attached a screenshot of the web interface settings for the Buffalo drive.

UPS Settings:
UPS Status: Synchronized Setting Normal
Synchronization with UPS: synchronize with UPS connected to this TeraStation
UPS Connection Type: USB Port (APC Style)
Shutdown Condition when Power Failure:
UPS behavior after TeraStation shutdown: Alive
UPS Recovery function: Disabled


What am I doing wrong?

[attachment deleted by admin]
Print
Go Up Pages1
User actions
Browser ID: smf (is_webkit)
Templates: 4: index (default), Display (default), GenericControls (default), GenericControls (default).
Sub templates: 6: init, html_above, body_above, main, body_below, html_below.
Language files: 5: index+Modifications.english (default), Post.english (default), Editor.english (default), Drafts.english (default), StopForumSpam.english (default).
Style sheets: 4: index.css, attachments.css, jquery.sceditor.css, responsive.css.
Hooks called: 110 (show)
Files included: 35 - 1354KB. (show)
Memory used: 934KB.
Tokens: post-login.
Queries used: 16.

[Show Queries]