News:

Buffalo provides Data Recovery services. Read about it here.

Main Menu

LS-QVL - 2 weeks rebuilding RAID 5 and still going

Started by olegpsh, March 13, 2013, 03:10:06 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

olegpsh

March 13, 2013, 03:10:06 PM

I've replaced disk 1 in my LS-QV4.0TL/R5 NAS after failure and started rebulding RAID 5 through the web interface. Since then the power LED has been blinking blue for almost 2 weeks now. Status LEDs 1-4 are solid green.  I cannot see the LinkStation through the NAS Navigator nor through the web interface.  I had about 1.7 Tb of data on it. Is it still rebuilding?

olegpsh

#1
March 17, 2013, 04:49:15 AM

Update: I was able to see my data briefly by booting into EM. I even updated firmare to 1.64 (which I had originally), but the firmware upgrade utillity (Mac version) kept rebooting the LS-QVL. The unit is still inoperable - the power LED is blinking blue. Any ideas?

Print
Go Up Pages1
User actions
Browser ID: smf (is_webkit)
Templates: 4: index (default), Display (default), GenericControls (default), GenericControls (default).
Sub templates: 6: init, html_above, body_above, main, body_below, html_below.
Language files: 5: index+Modifications.english (default), Post.english (default), Editor.english (default), Drafts.english (default), StopForumSpam.english (default).
Style sheets: 4: index.css, attachments.css, jquery.sceditor.css, responsive.css.
Hooks called: 131 (show)
Files included: 35 - 1354KB. (show)
Memory used: 936KB.
Tokens: post-login.
Queries used: 20.

[Show Queries]