LS-WX2.0TL/R1 - Dead?

[jsmyle]

Some two weeks ago the "auto" setting no longer seemed to function. By turning the unit on manually when I wanted access, it worked fine for the next week. Now, when turned on, the unit continually cycles, trying unsuccessfully to start up. At first I thought it was indicating that it was syncing the two hard drives. However, after 24 hours it is still doing the following: (i) Power blinks for approx. 3 seconds; (ii) Function blinks once; (iii) Power blinks for approx. 3 seconds; (iv) this cycle repeats a number of times, then; (v) Power blinks for approx. 9 seconds; (vi) Info/Error blinks 7 times; (vii) Function light blinks once, then; (viii) goes back into "(i) Power blinks for approx. 3 seconds; (ii) Function blinks once" cycle. Is it time to explore exercising the warranty?

[realborat]

What is the Firmware on the unit, ?Reset it first with the function button, you can find how on the forum. Info/Error lightcolour, sequence and the lenght of the blinks(ie.one long and then short ones etc)

[jsmyle]

The firmware version is 1.62. On reset, the Power and Function lights alternately blink blue, then stop. Next, Info/Error blinks 7 times (short). Next, Function blinks red, once (long?). Afterwards it goes back into the pattern described in the original email.