TFTP Timeout, Not Uploading Files - LinkStation LS-WX2.0TL/R1-EU

[fahid]

Hello,

On my LinkStation LS-WX2.0TL/R1-EU, after replacing Hard Disks, I have to install firmware to get it working.

• 
  I downloaded TFTP Boot Recovery LS-WXL 1.33
  
• 
  Set my LAN IP to 192.168.11.1
  
• 
  Turned OFF Windows Firewall
  
• 
  Turned OFF Antivirus
  
• 
  RUN the TFTP Boot app/ server from utility downloaded
  
• 
  Conntect the NAS to PC via Network cable DIRECTLY,  NAS-------PC, No Router etc. in Between
  
• 
  Turned the NAS ON
  
• 
  When Red LED Started Flashing, I pressed the Function Button
  
• 
  Blue LED Started Flashing, Networking Connection Started Showing Activity
  
• 
  But in TFTP Server Windows it says Timeout, Detailed output from TFTP Server below
  

Code Select Expand


Preparing to write TFTP configuration settings.
TFTP Configuration settings have been written.
TFTP Server Multithreaded Version 1.4 Windows Built 1.400


Starting TFTP...
alias / is mapped to D:\tftp\
listening On: 192.168.11.1:69
listening On: 127.0.0.1:69
listening On: 192.168.178.20:69
permitted clients: all
server port range: all
max blksize: 65464
defult blksize: 512
default interval: 3
overwrite existing files: No
thread pool size: 1

accepting requests..
Client 192.168.11.150:3077 D:\tftp\initrd.buffalo, Timeout
Client 192.168.11.150:3077 D:\tftp\initrd.buffalo, Timeout
Client 192.168.11.150:3077 D:\tftp\initrd.buffalo, Timeout
Client 192.168.11.150:3077 D:\tftp\initrd.buffalo, Timeout
Client 192.168.11.150:3077 D:\tftp\initrd.buffalo, Timeout
Client 192.168.11.150:3077 D:\tftp\initrd.buffalo, Timeout
Client 192.168.11.150:3077 D:\tftp\initrd.buffalo, Timeout
Client 192.168.11.150:3077 D:\tftp\initrd.buffalo, Timeout

[fahid]

Then I tried the same but this time I used a different TFTP Server
Although I did put the required files i.e. initrd.buffalo and uImage.buffalo to the Root Directory of new TFTP Server, but it still fails, below is a Screenshot of Result





Please HELP me, what am I doing wrong or How can I solve this issue

[ecronic]

Very old thread... But did you ever find a solution for the timeout? I'm facing the same issue for my LS-QVL.