News:

Buffalo provides Data Recovery services. Read about it here.

Main Menu

Disk Errors and Testing

Started by Starb7, March 09, 2020, 05:06:09 AM

Previous topic - Next topic

Starb7

Hi All

I have just got a new line of text appear on the bottom of the 'Activity Report' as follows:

[DISK error status]
Disk1   32

Presumably 'Disk1', the only one as it is an LS120D, is failing and from what I can tell, it has 32 (from none to 32?) bad sectors - is that correct?

There's no LED warning, ie that is solid white as normal and this is set as a backup unit and so the folders/shares are [X] Backup types.  Now, I would like to do a disk check on it but there are dire warnings:

Warning: Before running the disk check, check that the disk is not set as a backup device. Do not run the disk check if the disk is set as a backup device.

Q. If I ran a disk check on it would that destroy the data in the 'Backup Folders' or is there another reason why a check should not be run?

TIA

Kane88

Correct, there are 32 bad sectors on that disk.

Is the backup already shot?  Probably, yes.

Worst case scenario: assume any and all files in that backup set are already corrupted.  It's probably not that drastic, but it's more than likely several files have been lost already.  even 1 bad sector can trash a 1TB disk image or VHD file.  I really don't know how 'spare areas' work in a super technical sense when it comes to bad sectors.  I think its a 50/50 thing at best- as to if any system can truly recover the the actual data from a bad sector, and move it to a good one.

At this point, you need to do a full backup of the known good source data (not the data on the nas itself), and put it on an entirely different disk.  Even usb disk(s) directly connected to a windows pc would work in this situation.

If a disk is bad, it generally is only going to get worse.  I would run the disk check after you have made an adequate backup.

The problem with the 210d units is that they have no internal fan.  A horrible buffalo design flaw IMHO.  They're heat traps.  I wound up opening the cases on the two 210s that I have.  They seldom get used, and when they are used- they're used without the lid on them  See link.  I would NOT do this until after you've adequately backed up your data.  Since the drive is shot, you can put a new wiped one in it- and TFTP load it just like a 2 disk unit.

Keep in mind, opening the case WILL void the warranty.  If your unit is still under warranty- I would definitely contact buffalo support about getting it replaced.


http://forums.buffalotech.com/index.php?topic=24955.0

Starb7

Quote from: Kane88 on March 09, 2020, 12:49:58 PM
Correct, there are 32 bad sectors on that disk.

Is the backup already shot?  Probably, yes.

Worst case scenario: assume any and all files in that backup set are already corrupted.  It's probably not that drastic, but it's more than likely several files have been lost already.  even 1 bad sector can trash a 1TB disk image or VHD file.  I really don't know how 'spare areas' work in a super technical sense when it comes to bad sectors.  I think its a 50/50 thing at best- as to if any system can truly recover the the actual data from a bad sector, and move it to a good one.

At this point, you need to do a full backup of the known good source data (not the data on the nas itself), and put it on an entirely different disk.  Even usb disk(s) directly connected to a windows pc would work in this situation.

If a disk is bad, it generally is only going to get worse.  I would run the disk check after you have made an adequate backup.

The problem with the 210d units is that they have no internal fan.  A horrible buffalo design flaw IMHO.  They're heat traps.  I wound up opening the cases on the two 210s that I have.  They seldom get used, and when they are used- they're used without the lid on them  See link.  I would NOT do this until after you've adequately backed up your data.  Since the drive is shot, you can put a new wiped one in it- and TFTP load it just like a 2 disk unit.

Keep in mind, opening the case WILL void the warranty.  If your unit is still under warranty- I would definitely contact buffalo support about getting it replaced.


http://forums.buffalotech.com/index.php?topic=24955.0

Thanks Kane88 pretty much what I expected and I had already backed up original data as you said - good advice.  Thanks.

antuxd

#3
Quote from: Kane88 on March 09, 2020, 12:49:58 PM
Correct, there are 32 bad sectors on that disk.

Is the backup already shot?  Probably, yes.

Worst case scenario: assume any and all files in that backup set are already corrupted.  It's probably not that drastic, but it's more than likely several files have been lost already.  even 1 bad sector can trash a 1TB disk image or VHD file.  I really don't know how 'spare areas' work in a super technical sense when it comes to bad sectors.  I think its a 50/50 thing at best- as to if any system can truly recover the the actual data from a bad sector, and move it to a good one.

At this point, you need to do a full backup of the known good source data (not the data on the nas itself), and put it on an entirely different disk.  Even usb disk(s) directly connected to a windows pc would work in this situation.

If a disk is bad, it generally is only going to get worse.  I would run the disk check after you have made an adequate backup.

The problem with the 210d units is that they have no internal fan.  A horrible buffalo design flaw IMHO.  They're heat traps.  I wound up opening the cases on the two 210s that I have.  They seldom get used, and when they are used- they're used without the lid on them  See link.  I would NOT do this until after you've adequately backed up your data.  Since the drive is shot, you can put a new wiped one in it- and TFTP load it just like a 2 disk unit.

Keep in mind, opening the case WILL void the warranty.  If your unit is still under warranty- I would definitely contact buffalo support about getting it replaced.


http://forums.buffalotech.com/index.php?topic=24955.0

Thanks bro! I was having similar issues. Your help really helped me!

Browser ID: smf (is_webkit)
Templates: 4: index (default), Display (default), GenericControls (default), GenericControls (default).
Sub templates: 6: init, html_above, body_above, main, body_below, html_below.
Language files: 5: index+Modifications.english (default), Post.english (default), Editor.english (default), Drafts.english (default), StopForumSpam.english (default).
Style sheets: 4: index.css, attachments.css, jquery.sceditor.css, responsive.css.
Hooks called: 203 (show)
Files included: 35 - 1354KB. (show)
Memory used: 1039KB.
Tokens: post-login.
Queries used: 16.

[Show Queries]