LS-WXL Partition not found. Aborting firmware update

[Samaf]

Hi,
My two hard disks are dead, I've replaced two other hard drives. Knowing that the firmware on the drives, not a good start to the NAS without an error.
So I did everything you need but I have this error when I have to put the firmware.
Here is the configuration screen:
http://image.noelshack.com/fichiers/2015/09/1424960714-buffalo-erreur-partition.png

The two hard disks are without MBR partition. Even if I create a ext2 partition, ntfs or fat that but the same error.

Cordialy,
Samaf

[davo]

Post a screenshot of the LSUpdater.ini file, you probably forgot to alter the noformatting option from 1 to 0.

If you don't do this and still select the rebuild partition table it will still not be able to format the disks.

[Samaf]

Here the file LSupdater.ini

[Application]
Title = BUFFALO LinkStation Series Updater Ver.1.69
WaitReboot = 1200
WaitFormat = 600
WaitFileSend = 600
WaitDiscover = 120

[Target]
ProductID = 0x00000011
ProductID2 = 0x00000012
ProductID3 = 0x00000013
ProductID4 = 0x00000014
ProductID5 = 0x00003006
ProductID6 = 0x00003007
ProductID7 = 0x00000015
ProductID8 = 0x00000016
ProductID9 = 0x00003008
ProductID10 = 0x00004001
ProductID11 = 0x00000017
ProductID12 = 0x00000019
ProductID13 = 0x00000020
ProductID14 = 0x00003010
Name = LinkStation

[Flags]
VersionCheck = 1
NoFormatting = 0

[SpecialFlags]
Debug = 1

Formatting is done but now I have this error and LED info/error flashes 6 times

No reponse from LinkStation after 1200 seconds, Try again?

[Samaf]

Now I have a big problem, the nas reboots constantly as if there was no hard drive inside.

[Samaf]

Look this video for my problem.
https://www.youtube.com/watch?v=a2FLx3jA3dU

[Samaf]

UP plz :)