Buffalo Forums

General => Lounge - Everything non-product related => : jslim38 March 29, 2013, 08:25:17 PM

: Newbie
: jslim38 March 29, 2013, 08:25:17 PM

Hello guys and gals new to the buffalo tech forum. And new to the buffalo all together.Im happy that my new Wzr-HP-G450 is on the way and i cant wait.

: Re: Newbie
: drmemory April 01, 2013, 01:08:23 PM

Welcome to the Buffalotech forums!

: Re: Newbie
: Untwom April 07, 2013, 02:05:27 AM

I'm also a newbie in this forum. My brother recently bought Buffalo N150 and I'm helping him setup the router so he can access the internet. :)

: Re: Newbie
: jslim38 April 07, 2013, 02:53:20 AM
Nice I have the wzr-hp-g 450h and all the buffalo router's are blazing fast this is the brand I'm sticking with for sure
: Re: Newbie
: donls May 25, 2014, 06:52:40 PM
I'm a newer newbie than previous posters. This is my first Bison Tech product.

Just got a LS-XL (LS-X3.0TL) Link Station Live for my sweetie (on her birthday). Finally got it plugged in - no problem accessing it and/or running the software on my MacOSX 10.9 MacBook Pro, but her MacOSX 10.5.8 Mac Pro G5 (nor mine) can't run the NASNavigator software. Installer is marked as Universal, but NASNavigator is Intel only. Also have good luck running on our older Intel systems (but 10.9 starts with the NAS already visible on the desktop).

Any suggestions for connecting with an old PPC system? Box indicates it should work with 10.3.9 or later, but says nothing about what CPU is required.
: Re: Newbie
: donls May 25, 2014, 09:01:54 PM
Ok, I found the solution.

I was able to find the IP address of the NAS by running the setup software on one of the newer machines (which started up Firefox to address the NAS, independent of the default browser setting). [In this case, firefox ran on a Parallels VM rather than on my main machine] I could have also found the IP address by examining DHCP settings from a number of sources.

Once I found the IP address, I was able to connect to the NAS using a browser on the older machines (or the newer ones) and turn on AFP. Once that was done, the older machines were able to connect to the NAS.

As far as I can tell, the only thing the NASNavigator software does is launch a web page connected to the NAS admin server.
: Re: Newbie
: peter.kendrick May 15, 2017, 08:27:18 AM
I just ordered AirStation AC1200 and I am excited to set it up upon receiving. Can someone guide me how to set it up? any link?
: Re: Newbie
: oroloren April 22, 2019, 04:40:30 AM
I am also a newbie in this forum. Hope will be helpful to the community. Good luck to all!
: Re: Newbie
: pawder September 07, 2020, 08:32:14 AM
hello, I'm newbie here, nice to meet you