Text only | Text with Images

Buffalo Forums

Products => Storage => Topic started by: SImonA on January 30, 2012, 05:13:23 AM

Title: Fitting New Drives to Terrastation TS-1.0 TGL/R5
Post by: SImonA on January 30, 2012, 05:13:23 AM

Hi I have the above Terastation. I wish to upgrade the drives from 4x 250Gb to 4x 2TB. I have read that I just need to swap out 1 drive at a time and update the array is this correct of do I need to fir teh 4 new drives and then write some firmware to them ?

 

thanks Simon 

Title: Re: Fitting New Drives to Terrastation TS-1.0 TGL/R5
Post by: davo on January 30, 2012, 05:27:24 AM
This unit won't support 8TB. max 2TB
Title: Re: Fitting New Drives to Terrastation TS-1.0 TGL/R5
Post by: SImonA on January 30, 2012, 07:33:55 AM

Hi 

thanks for the reply,

I also have a Linkstation that I was told would only support 500mb drives, however a nice guy at Buffalo Tech Sup gave me some instructions and it now has a 1TB drive running in it, I thought the limitation was in the firmware that goes on the drive not the chassis ?   

Title: Re: Fitting New Drives to Terrastation TS-1.0 TGL/R5
Post by: dmaryniak5 on January 13, 2021, 03:49:03 AM
I realise this is a very old post, but how did you get the 1tb drive in and working? What did the nice tech tell you? Just throw the tb drive in, and it works?
Text only | Text with Images
Browser ID: smf (is_webkit)
Templates: 1: Printpage (default).
Sub templates: 4: init, print_above, main, print_below.
Language files: 1: index+Modifications.english (default).
Style sheets: 0: .
Hooks called: 60 (show)
Files included: 27 - 1055KB. (show)
Memory used: 737KB.
Tokens: post-login.
Queries used: 10.

[Show Queries]