Print Page - LS-WX Can't set time zone

Title: LS-WX Can't set time zone
Post by: jbleep on January 10, 2012, 08:08:27 PM

I have two Linkstations - LS-WS1.0TL/1D. I bought one to try it and liked it so much I bought another and put the drive from the 2nd in the first to have identical ones (1TB Raid 1). The 2nd one I put another 1 TB in as backup. (That was quite a trip, because it did not want to come up, but I got it.) Both are on firmware 1.56. They are software-wise more or less identical, with slight differences for some reason. On the 2nd one, it does not show the time zone in the time setting in the web interface. They are both on "sete automatic" from a jp website. So the time is tomorrow on the 2nd one!! There is no way to change the time zone because there is no drop box or anything. Whazzup with this? The first one works fine.

Title: Re: LS-WX Can't set time zone
Post by: Marianillo on September 07, 2012, 02:26:51 AM

I'm having the same issue.

My unit is a LS-WSXL running the 1.61 firmware version.

The "Modify button" in the time section is greyed out and cannot change the time configuration at all.

Timezone that is actually using is GMT and the NTP server is ntp.jst.mfeed.ad.jp.
I just need to change the timezone to GMT+2.

Any ideas?.

Title: Re: LS-WX Can't set time zone
Post by: berty2 on September 18, 2012, 04:28:28 AM

I have the sam problem modify settings button is hidden...

ls-wx2.0tl/r1 1.60 firmware.

Buffalo Forums

Products => Storage => Topic started by: jbleep on January 10, 2012, 08:08:27 PM