Buffalo Forums

Hopefully someone can help.  I currently have a yellow code flashing on my Cloudstor Pro, 1 yellow flash followed by 8 yellow flashes.  I have found a few threads discussing error codes but none of them have eight flashes as a code.

I really disapointed in the documentation with the Buffalo.  I'm hoping to find a complete list of errors, any ideas of where to get them?

Please help!  Thanks!

You are right.  Buffalo documentation is incomplete.  Buffalo should do a better job in documenting.

I 18 means The RAID array is being reconfigured in the case of Linkstions.

Most likely the same applies to CS. Maybe you have added a second disk and created a RAID1 array.

There is also an undocumented I53 which means CS cannot connect to the Pogoplug server.

Thank you very much.  I did put a second hard drive in and the raid started but not having any idea if it was working along with the flashing lights was a little aggravating.  Thanks again!  Now to find a complete list.  By the way I did down load Nasnavigator2 and it deciphered the code for me when it found the NAS, just incase anyone else was looking for some good trouble shooting help.

Has anyone ever found a list of error codes?  Could save a lot of time if Buffalo published one... Here or elsewhere...

Thanks in advance if you can help.

Check the PDF user manual, in the Appendix section. I have a LS-WVL and error code lists for several models starts on page 159. Not sure if that's the completel list, but it covers a lot of codes.

I have an LS-QL/R5 and there is no listing.  Very high level manual stops on page 88.  Only discussion of errors is to 1) run a diskscan, and 2) reformat.  :(