Print Page - Link Station Quad model LS-Q4.0TL/R5 blue light blinking 2 long one short for days

Title: Link Station Quad model LS-Q4.0TL/R5 blue light blinking 2 long one short for days
Post by: rcuteri on February 11, 2011, 10:36:35 AM

Link Station Quad model LS-Q4.0TL/R5 :

Mainboard failed. Bought completely new system. Put old drives in new enclosure over a week ago.

Blue light blinking 2 long one short for a week. The 4 drive lights were all blinking fast, but now they've simply been solid green for 24 hours.NAS Navigator found system and said it was doing a disk check on drive one until yesterday. Now it comes up blank and unable to log into the web interface. What's up?

Title: Re: Link Station Quad model LS-Q4.0TL/R5 blue light blinking 2 long one short for days
Post by: Jotin on February 11, 2011, 01:11:26 PM

I would try and update the firmware. You needed to do this once you put the drives in a new unit.

Title: Re: Link Station Quad model LS-Q4.0TL/R5 blue light blinking 2 long one short for days
Post by: rcuteri on February 12, 2011, 04:44:36 PM

It shipped with the latest firmware. Or do you mean the software on drive one? If so, can you point me to how to do this?

Title: Re: Link Station Quad model LS-Q4.0TL/R5 blue light blinking 2 long one short for days
Post by: Jotin on February 14, 2011, 09:45:48 AM

You need to go to http://www.buffalotech.com/support/downloads and download the version 1.10 firmware for your unit and run the firmware updater. This should fix the issue.

Title: Re: Link Station Quad model LS-Q4.0TL/R5 blue light blinking 2 long one short for days
Post by: rcuteri on February 14, 2011, 03:22:40 PM

How do I get the system to be seen on the net? Or do I do this from a PC?

Title: Re: Link Station Quad model LS-Q4.0TL/R5 blue light blinking 2 long one short for days
Post by: Jotin on February 14, 2011, 03:26:52 PM

You have to update this unit from a pc.

Title: Re: Link Station Quad model LS-Q4.0TL/R5 blue light blinking 2 long one short for days
Post by: rcuteri on February 14, 2011, 04:16:39 PM

Thanks. I read the FAQ and saw that. Do I need to cycle power to the unit?

Title: Re: Link Station Quad model LS-Q4.0TL/R5 blue light blinking 2 long one short for days
Post by: Jotin on February 18, 2011, 09:17:52 AM

Yes sir.

Title: Re: Link Station Quad LS-Q4: the firmware loader cannot find device - How do I connect?
Post by: debug000 on November 27, 2012, 03:47:56 PM

Title: Re: Link Station Quad LS-Q4: the firmware loader cannot find device - How do I connect?
Post by: realborat on November 28, 2012, 04:03:17 AM

Ok, here is a thing, how is LS-Q4 connected,

while answering answering that, disable firewall and antivirus software,

Buffalo Forums

Products => Storage => Topic started by: rcuteri on February 11, 2011, 10:36:35 AM