Print Page - UPS not detected / Can't select Enable Radio Button

Title: UPS not detected / Can't select Enable Radio Button
Post by: timseguy on January 10, 2011, 04:43:21 PM

Configuration:

Buffalo Linkstation Quad 4TB

Firmware 1.11

UPS - CyberPower CP600 LCD

UPS to Buffalo connectivity = USB

I've recently purchased a UPS (not supported one b/c I can't find or care for the limited supported options) and connected to the LS via a USB cable. The LS doesn't recognize the UPS in the UPS section, although in the System Status (USB section) the device is recognized as follows:

USB Class= Other

Manufacturer = CPS

Device Name=UPS CP600

USB 2.0/1.1=USB 1.1

I have resarted the LS and tried various combinations of powering the UPS / LS etc... to no avail. The LS will not let me select the "enable" radio button. Any ideas or hacks (besides buying a supported version of the UPS)?

Thanks,

Tim

Title: Re: UPS not detected / Can't select Enable Radio Button
Post by: philmills on March 07, 2013, 06:53:34 AM

I have same problem with 8TB version

Firmware version:1.62 (DTCP-IP:1.60-20120615)

Buffalo Forums

Products => Storage => Topic started by: timseguy on January 10, 2011, 04:43:21 PM