Text only | Text with Images

Buffalo Forums

Products => Storage => Topic started by: obx_fisherman on August 16, 2010, 02:30:08 PM

Title: Terastation Performance
Post by: obx_fisherman on August 16, 2010, 02:30:08 PM

I have recently purchased and installed a TS-RIX8.0TL/R5 for my organization.  It is connected via an HP Procurve Switch (1810G-8) to my HP DL380G5 server. I have one of the NICs in the server dedicate for the iSCSI network. My iSCSI network is on a different subnet than my corporate network.  I have Jumbo frames enabled on the server, switch and the Terestation.

 

My problem lies with the transfer rate to the TeraStation.  I copied a 34M file from my workstation to a folder on the TeraStation.  It took 16.4 seconds at 2.07M/sec.  I copied the same file from my workstation to a local hard drive on the server and it took 2.6 seconds at 13M/sec. I backed up our users folded last friday with 126K files, and 262G of data and it took 7 hours and 49 minutes.

 

Is this normal throughput for the Terastation or should I expect faster response? 

 

Thanks

Title: Re: Terastation Performance
Post by: Dustrega on August 16, 2010, 03:31:16 PM

I would take a look at this post.

Text only | Text with Images
Browser ID: smf (is_webkit)
Templates: 1: Printpage (default).
Sub templates: 4: init, print_above, main, print_below.
Language files: 1: index+Modifications.english (default).
Style sheets: 0: .
Hooks called: 50 (show)
Files included: 27 - 1055KB. (show)
Memory used: 734KB.
Tokens: post-login.
Queries used: 10.

[Show Queries]