Text only | Text with Images

Buffalo Forums

Products => Storage => Topic started by: Ironmonkey on August 02, 2010, 02:53:54 PM

Title: Power Light Flashing
Post by: Ironmonkey on August 02, 2010, 02:53:54 PM

I have a Linkstation Live LS-CHL. I logged into the control panel of the Linkstation earlier on to do a restart of the system so new files would show up in my PS3 (I have done this many times before). The NAS went into restart as it usually does but it hasnt come back on since. The power light is just flashing and I cant connect to it.

Tried a reboot with the power off but its still the same.

 

Any one have any idea?

Title: Re: Power Light Flashing
Post by: Jotin on August 05, 2010, 12:20:59 PM

Try following the reset procedure. Turn the switch to off, make sure it powers down. Then hold the function button for six seconds and while you continue to hold the function button move the switch to on and as soon as the power light begins to flash release the function button and press it again for one second. Then see if the unit boots up. Use the nas navigator to try and find the unit.

Text only | Text with Images
Browser ID: smf (is_webkit)
Templates: 1: Printpage (default).
Sub templates: 4: init, print_above, main, print_below.
Language files: 1: index+Modifications.english (default).
Style sheets: 0: .
Hooks called: 50 (show)
Files included: 27 - 1055KB. (show)
Memory used: 737KB.
Tokens: post-login.
Queries used: 10.

[Show Queries]