Print Page - LS-W2 OTGL/R1 2TB cant connect, HELP

Title: LS-W2 OTGL/R1 2TB cant connect, HELP
Post by: mibster on July 27, 2010, 03:05:29 AM

Hi,

I have recently formatted my PC and upon installing the NAS navigator (easy setup) the program said failed to find device. It is connected via ethernet cable to my PC. I follow the on screen instructions to the letter, press button wait for lights to go green, top light solid bottom light solid /flashing. Im in a bit of a pickle as I backed up all my photos music etc to this blasted device. Any advice as to how to fix what has gone wrong. My only saving grace is that all of my photos and music are also on DVD's, but not my saved games :(

Title: Re: LS-W2 OTGL/R1 2TB cant connect, HELP
Post by: AngelsAbys on July 27, 2010, 10:25:39 AM

please try to set a static IP address on your machine to the same IP range that the unit was originally on if you were using a static address. Otherwise please set a static address on your local machine of 192.168.11.1 and perform a factory default on the unit http://forums.buffalotech.com/t5/Storage/FAQ-1-of-4-EM-Mode-boot-procedures-please-read-this/td-p/11008

Browser ID: smf (is_webkit)
Templates: 1: Printpage (default).
Sub templates: 4: init, print_above, main, print_below.
Language files: 1: index+Modifications.english (default).
Style sheets: 0: .
Hooks called: 50 (show)
Files included: 27 - 1055KB. (show)
Memory used: 737KB.
Tokens: post-login.
Queries used: 10.

[Show Queries]

Buffalo Forums

Products => Storage => Topic started by: mibster on July 27, 2010, 03:05:29 AM