Buffalo Forums

Hi,

I have a Linkstation Live, and it lost the firmware configuration. I tried to update with LSUpdater, but I didn´t have any good result. Today if I use the NASNavigator the information about the Linkstation are below:

I tried to use the ACP_COMMANDER to reset the EM Mode, but I didn´t have any success. The ACP_COMMANDER show the information below about the LinkStation:

I would like to know if is it possible to recovery the firmware or if is it possible to recovery the data inside the HDD?

Regards.

You can try the force firmware procedure which is outlined in this link  http://forums.buffalotech.com/t5/Storage/FAQ-2-of-4-Force-Firmware-update-procedure-please-read-this/td-p/11011   as for data recovery you can look at UFS explorer as well as professional data recovery service

Hi,

I tried to do this, but the LSUpdater freezes. See imagens below:

Do you have any other tip?

Regards,

Open up the NAS, unscrew the hdd & detach the sata daughterboard frm the hdd.

Hi,

thank you for the answer. More one question:

My NAS is showing a error, but I can´t identified the code, it show 6 (six) shorts flashes on red light with beeps.

Do you know what is this?

Thank you.

The problem you have is the same problem that lots of people have with firmware 2.21 thats been posted on here and many other forums but for some reason Buffalo seems not to be intrested and still lets it's mods keep replying to the complaints as if its a user problem.

Why it's not been removed from download and they are still letting people brick their units is beyond me . ?

"FW 2.21 May need to be pulled. ?"

http://forums.buffalotech.com/t5/Storage/FW-2-21-May-need-to-be-pulled/td-p/30409

"HS-DH1000GL FW 2.21 Powers off and beeps"

http://forums.buffalotech.com/t5/Storage/HS-DH1000GL-FW-2-21-Powers-off-and-beeps/td-p/29915

.

Unless you can get hold of an older firmware for that NAS, otherwise I hope Buffalo might be working on a solution at the moment...just got to take it easy...

Geeeeeeez

If you bothered to read the thread i posted then  you would know that the older firmware no longer works on linkstations upgraded to 2.21.

:)

If it's a load of cake then tell everybody that has a locked up linkstation in this thread that can now now longer respond to any firmware after upgrading to 2.21 as it just greys out.

If you used the telnet hack to do it then thats not official so too the average user it's not cake.

http://forums.buffalotech.com/t5/Storage/FW-2-21-May-need-to-be-pulled/td-p/30409

Hi. After upgrade firmware of my LS Live to 2.21 i can´t acess to my NAS. Can you tell me how to downgrade firmware?

Thanks

Sorry my english, i´m portuguese.