Hi everyone
I have some found answers here but not to all of my questions.
First
I have a LSL HS-DH500GL.
Firmware ver. 2.21
Ser # 99883380211352
Fan voltage
Black & Yellow 3.3
Red & Yellow 3.3
Black & Red 0.0
Power is through an APC backup
I have it in my home network rack so I don't hear any beep's. The only way I know it's
not working is a pop up on my laptop with a "mapped network drive is not available"
When I check it, the power LCD is out and it has a slow blinking orange info LCD.
I did some trouble shooting and it was in EM mode. When I tried the firmware update, it
went all the way through reboot and gave me the ACP STATE FAILURE error. but when I
started the NAS Navigator it came up updated and everything seems to be working.
Now the questions.
Is the fan on a thermostat? when I got it back up the fan didn't come on. It did run at some point because I stuck
a small piece of paper in it, and it had moved.
and what is the slow blinking orange LCD code.
If this was a heat related problem I have moved it lower in my rack and have the side cover off until I get this
all worked out.
TIA