Print Page - TFTP MODE E06: Lost boot image

Title: TFTP MODE E06: Lost boot image
Post by: amitc on May 16, 2010, 03:41:41 PM

Hi, I have a terastation ES - TS-XEL/R5 that shows in the display TFTP MODE E06: Lost boot image... Is there a way to get it up and running again????

Title: Re: TFTP MODE E06: Lost boot image
Post by: AngelsAbys on May 17, 2010, 08:09:04 AM

If the boot image is lost you will need to update the firmware/kernal to make it operational again, http://forums.buffalotech.com/t5/Storage/FAQ-2-of-4-Force-Firmware-update-procedure-please-read-this/td-p/11011 http://forums.buffalotech.com/t5/Storage/FAQ-3-of-4-TFTP-boot-procedure-please-read-this/td-p/11015 please try each link provided as one of them will remedy this issue presented

Title: Re: TFTP MODE E06: Lost boot image
Post by: drifting on July 22, 2019, 08:09:56 AM

I know this thread is as old as the hills, but to be honest I am heartbroken that my lovely old NAS's disks have given up the ghost.
Have in the past recovered the the boot image, but sadly no longer have the tftp program and more importantly the rom images to upload.
Downloaded the latest firmware 1.72, which is not a lot of good if you cannot even connect to it without the boot image.
Anyone have the TFTP program and correct image for this NAS?

Mine is an TS-XEL/R5

Regards Drift.

Title: Re: TFTP MODE E06: Lost boot image
Post by: 1000001101000 on July 22, 2019, 09:32:14 AM

The TS-XEL can be restored using this process:
https://buffalonas.miraheze.org/wiki/Restoring_Stock_Firmware_without_TFTP

You can use the same boot files extracted for that process to recover via TFTP as well (using pretty much any TFTP utility).

Buffalo Forums

Products => Storage => Topic started by: amitc on May 16, 2010, 03:41:41 PM