Print Page - LS-QL/R5

Title: LS-QL/R5 - 3 flashes
Post by: kernsting on May 14, 2010, 02:45:30 PM

I'm unable to access the NAS. I have light flashing x3 with all drives green. The factory reset does not change this. I can see teh NAS on Navigator2, but it has a question mark and the web interface allows me to sign in, but a "format or disk check" is in process. I have tried waiting, but after a day the LS disappears from the NASNavagator.

I have looked at TFTP, but am unsure of my firmware or boot image.

Is this the correct process, or should I try something else?

kevin

Title: Re: LS-QL/R5 - 3 flashes
Post by: AngelsAbys on May 17, 2010, 08:22:34 AM

typically 3 red flashes means there is a problem with the hard drive itself, if it is saying it is formatting may need to replace the drive. you can also try to remove 1 drive at a time to see which disk is the problem drive and replace that one individually

Browser ID: smf (is_webkit)
Templates: 1: Printpage (default).
Sub templates: 4: init, print_above, main, print_below.
Language files: 1: index+Modifications.english (default).
Style sheets: 0: .
Hooks called: 50 (show)
Files included: 27 - 1055KB. (show)
Memory used: 734KB.
Tokens: post-login.
Queries used: 10.

[Show Queries]

Buffalo Forums

Products => Storage => Topic started by: kernsting on May 14, 2010, 02:45:30 PM