Text only | Text with Images

Buffalo Forums

Products => Storage => Topic started by: lsabo on May 03, 2010, 05:45:23 PM

Title: Installing Firmware
Post by: lsabo on May 03, 2010, 05:45:23 PM
   

Terastation III - TSX20TLR5

Current Firmware 1.20

 

I've never installed fw on a Terastation.  I am having problems with connecting to the active directory and one of the 'to do's' is to make sure the fw is updated.  It looks like the latest & greatest is 1.30.  Right at the moment, the TS is on the network and I access it via IP address.  I am wondering how I should be connected to it to install the fw update?

Title: Re: Installing Firmware
Post by: Duplo on May 03, 2010, 06:04:21 PM
   

I flashed a TS-1.0TGL/R5 today and it was very straight forward. I just downloaded and started the updater, It searched for and found the drive.Then flashed it, everything was automatic.
It has to be on the same networkrange when you flash.
When I started the NAS it had a 192.167 adress while the PC I flashed from was in 192.168 range, It found the drive just fine, but wouldn't flash. So I changed the IP of the nas to a 192.168 adress and it flashed just fine.

I see there is a read me before updating to 1.30 firmware on your model. I can't get the file or the firmware to your NAS as I have to type in a serial to get it. But I guess it's pretty straight forward on your model too.

 

 

Text only | Text with Images
Browser ID: smf (is_webkit)
Templates: 1: Printpage (default).
Sub templates: 4: init, print_above, main, print_below.
Language files: 1: index+Modifications.english (default).
Style sheets: 0: .
Hooks called: 50 (show)
Files included: 27 - 1055KB. (show)
Memory used: 733KB.
Tokens: post-login.
Queries used: 10.

[Show Queries]