Text only | Text with Images

Buffalo Forums

Products => Storage => Topic started by: bechau on March 30, 2010, 10:24:32 PM

Title: NASNavigator2 not displaying disk volume
Post by: bechau on March 30, 2010, 10:24:32 PM
   

My unit:

1. Link Station Quad with 4 HDD (1TB from factory + three additional 2TB Hitachi HDD), drives are NOT set to RAID.

2. NASNavigator 2.22

3. Window 7 on HP Pavillion

 

Problem:

NASNavigator is not showing drive volume green bars as it should.  However, when USB drive is connected to LS Quad, the bar for USB volume shows up.

 

Please advise.

Title: Re: NASNavigator2 not displaying disk volume
Post by: Thaitawat on March 30, 2010, 11:38:51 PM
   

There is a problem only standard mode.

This is issue now can not fixed it.

Title: Re: NASNavigator2 not displaying disk volume
Post by: michiganian on March 30, 2010, 11:55:28 PM
   

On Buffalo web page, you can find version 2.24 as the latest version. Did you try it?

If 2.24 still has the same issue, Buffalo should take care of it seriously.

Title: Re: NASNavigator2 not displaying disk volume
Post by: bechau on March 31, 2010, 12:32:00 AM
   

Already installed 2.24.  It is still not working.  Please let me know if anyone can resolve this.  Thank you.

Text only | Text with Images
Browser ID: smf (is_webkit)
Templates: 1: Printpage (default).
Sub templates: 4: init, print_above, main, print_below.
Language files: 1: index+Modifications.english (default).
Style sheets: 0: .
Hooks called: 60 (show)
Files included: 27 - 1055KB. (show)
Memory used: 734KB.
Tokens: post-login.
Queries used: 10.

[Show Queries]