Print Page - USB HDD not to be detected

Title: USB HDD not to be detected
Post by: Snufkind on March 30, 2010, 04:03:21 AM

Hello,

I used a trekstor usb hdd with 500 gb on my LinkStation Pro LS-GLD5E. until it broke down. Thus I changed to a 1,5 tb hard disk by Freecom but my LinkStation just do not detect it! I already formated it to NTFS without success. Do you have a solution?

Title: Re: USB HDD not to be detected
Post by: PCPiranha on March 30, 2010, 05:51:43 AM

#1. This is not supported.

#2. You need to get the firmware back onto the unit (this is the only info that I will give):

http://forums.buffalotech.com/t5/Storage/FAQ-3-of-3-TFTP-boot-procedure-please-read-this/td-p/11015

#3. The drive should not be formatted to NTFS. This unit uses XFS filesystem.

Browser ID: smf (is_webkit)
Templates: 1: Printpage (default).
Sub templates: 4: init, print_above, main, print_below.
Language files: 1: index+Modifications.english (default).
Style sheets: 0: .
Hooks called: 50 (show)
Files included: 27 - 1055KB. (show)
Memory used: 737KB.
Tokens: post-login.
Queries used: 10.

[Show Queries]

Buffalo Forums

Products => Storage => Topic started by: Snufkind on March 30, 2010, 04:03:21 AM