Hi,
Concerned about error message, got a couple of hundred during read of USB via email from nas, similar to below.
It would appear to related to using an usb drive and reading from this, hope its not the nas drive, The usb seems to become invisible at times and needs to be remounted. USB format is NTFS, using win7 and only doing read into NAS. NAS a couple of days old.
Advice/feedback appreciated.
LinkStation Status Report:DISK Error Notification
LS-QL815 (LinkStation)
:Error
:Disk is unusable
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
DISK Error Notification
HDD error occurred
Disk(s) the error occurred
:UnknownDisk()
This drive is faulty.
[LinkStationInformation]
LinkStationName
: LS-QL815 (LS-QL)
Time
: 2010/03/25 22:43:55
Setting Screen
was initially getting a meaasge with more specific info such as below nominating sector;
:Error
:Read error
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
DISK Error Notification
HDD error occurred
Disk(s) the error occurred
:UnknownDisk()
(sde) READ sector:6293512 count:6
Disk writing error
RAID drive error will be repaired automatically.
Continuous backup is recommended.
[LinkStationInformation]
LinkStationName
: LS-QL815 (LS-QL)
Time
: 2010/03/25 16:06:22
Setting Screen
First thing what model is your linkstation? I'm assume its a LS Quad from the "LS-QL815 (LinkStation)" but I just want to be sure. Second are you just trying to copy something from linkstation to the usb (attached to a win7 computer?) or are you using disk backup off the unit or any other software to do it?
The errors don't seem to indicate a bad nas but you could try copying to computer then to the usb or try a different usb as well just to see if any of that makes a difference.