Print Page - powering down despite manual mode (LS Pro2)

Title: powering down despite manual mode (LS Pro2)
Post by: kurkista on November 24, 2008, 01:28:20 AM

Hei,

my LSP2 at home will eventually power down even in the power mode "Manual" and won't wake up when I try to connect to it either via ftp or buffalonas.com, it's frustrating. Can't access my files from work. Anyone with a solution? Please?

At home I've noticed that the LS will power down randomly but wake up again when I use my iMac eventhough the power switch is in Manual mode.

(the LS P2 is connected to an apple AirPort Extreme which again is connected to the net through a Motorola cable modem.)

thanks in advance

Title: Re: powering down despite manual mode (LS Pro2)
Post by: Paul on November 25, 2008, 09:25:03 AM

What firmware are you running on it? You may want to update the firmware on the unit.

Title: Re: powering down despite manual mode (LS Pro2)
Post by: kurkista on November 25, 2008, 10:58:49 AM

Hi, thanks for answering. My LS runs firmware 3.07. I checked and noticed it is the latest version. What else can be done?

Title: Re: powering down despite manual mode (LS Pro2)
Post by: Paul on November 26, 2008, 09:03:46 AM

I would flash the firmware removing any possible corruption, if this does not work then set up an RMA with your local support.

http://forums.buffalotech.com/buffalo/board/message?board.id=0101&message.id=277&query.id=13954#M277

above is a link on how to force flash the firmware with the same version.

Title: Re: powering down despite manual mode (LS Pro2)
Post by: kurkista on December 08, 2008, 05:53:17 AM

thanks Paul,

anyhow, I just got a brand new linkstation from the vendour after the had checked the hardware.

I hope this one will work.

Title: Re: powering down despite manual mode (LS Pro2)
Post by: Paul on December 08, 2008, 12:38:11 PM

let me know if you have any issues

Buffalo Forums

Products => Storage => Topic started by: kurkista on November 24, 2008, 01:28:20 AM